Dell PowerConnect 5324 Command Line Interface Reference Manual

162 IP Addressing Commands
www.dell.com | support.dell.com
Example
The following example adds the IP address 198.133.219.232 and MAC address 00:00:0c:40:0f:bc to
the ARP table.
arp timeout
The arp timeout Global Configuration mode command configures how long an entry remains in
the ARP cache. To restore the default value, use the
no form of this command.
Syntax
arp timeout seconds
no arp timeout
• seconds —Time (in seconds) that an entry remains in the ARP cache. (Range: 1 - 40000000)
Default Configuration
The default timeout is 60000 seconds.
Command Mode
Global Configuration mode
User Guidelines
• It is recommended not to set the timeout value to less than 3600.
Example
The following example configures ARP timeout to 12000 seconds.
clear arp-cache
The clear arp-cache Privileged EXEC mode command deletes all dynamic entries from the ARP
cache.
Syntax
clear arp-cache
Default Configuration
This command has no default configuration.
Console (config)# arp 198.133.219.232 00:00:0c:40:0f:bc ethernet
g8
Console (config)# arp timeout 12000

Dell PowerConnect 5324 Specifications

General

Switching Capacity	48 Gbps
VLAN Support	Yes
Rack Mountable	Yes
Device Type	Switch
MAC Address Table Size	8K entries
RAM	64 MB
Flash Memory	8 MB
Power Device	Internal power supply
Voltage Required	AC 120/230 V (50/60 Hz)
Jumbo Frame Support	Yes
Ports	24 x 10/100/1000 + 2 x SFP
Management	Web-based, SNMP, CLI
Enclosure Type	Rack-mountable
Routing Protocol	Static IP routing
Remote Management Protocol	SNMP 1, 2, 3
Features	Flow control, auto-negotiation, port mirroring, Quality of Service (QoS)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x
Operating Temperature	0 °C to 45 °C
Storage Temperature	-20 °C to 70 °C
Humidity	5% to 95% (non-condensing)
Layer	Layer 2