Dell PowerConnect 5324 Command Line Interface Reference Manual

Clock 93
Clock
clock set
The clock set Privileged EXEC mode command manually sets the system clock.
Syntax
clock set hh:mm:ss day month year
or
clock set hh:mm:ss month day year
• hh:mm:ss —Current time in hours (military format), minutes, and seconds (0 - 23, mm: 0
- 59, ss: 0 - 59
).
• day —Current day (by date) in the month (1 - 31) .
• month —Current month using the first three letters by name (Jan, …, Dec).
•
year —Current year (2000 - 2097).
Default Configuration
The default time set is 0:0:0:0 Jan 1 2000 or xxxxx Month Day Year.
Command Mode
Privileged EXEC mode
User Guidelines
• There are no user guidelines for this command.
Example
The following example sets the system time to 13:32:00 on the 7th March 2002.
clock source
The clock source Privileged EXEC mode command configures an external time source for the
system clock.
Syntax
clock source { sntp }
no clock source
• sntp —SNTP servers
Console# clock set 13:32:00 7 Mar 2002

Dell PowerConnect 5324 Specifications

General

Switching Capacity	48 Gbps
VLAN Support	Yes
Rack Mountable	Yes
Device Type	Switch
MAC Address Table Size	8K entries
RAM	64 MB
Flash Memory	8 MB
Power Device	Internal power supply
Voltage Required	AC 120/230 V (50/60 Hz)
Jumbo Frame Support	Yes
Ports	24 x 10/100/1000 + 2 x SFP
Management	Web-based, SNMP, CLI
Enclosure Type	Rack-mountable
Routing Protocol	Static IP routing
Remote Management Protocol	SNMP 1, 2, 3
Features	Flow control, auto-negotiation, port mirroring, Quality of Service (QoS)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x
Operating Temperature	0 °C to 45 °C
Storage Temperature	-20 °C to 70 °C
Humidity	5% to 95% (non-condensing)
Layer	Layer 2