228 RMON Commands
www.dell.com | support.dell.com
Example
The following example enables a Remote Monitoring (RMON) MIB history statistics group on port
g8 with the index number "1" and a polling interval period of 2400 seconds.
show rmon collection history
The
show rmon collection history
User EXEC mode command displays the requested history
group configuration.
Syntax
show rmon collection history
[
ethernet
interface
|
port-channel
port-channel-number
]
•
interface
—Valid Ethernet port.
•
port-channel-number
—Valid port-channel trunk index.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
• There are no user guidelines for this command.
Example
The following example displays all RMON group statistics.
Console (config)# interface ethernet g8
Console (config-if)# rmon collection history 1 interval 2400
Console# show rmon collection history
Index Interface Interval Requested
Samples
Granted
Samples
Owner
------ ---------- -------- --------- ---------- ----
1 1 1000 50 50 CLI
To Next Page
Loading...
