IP Addressing Commands 167
Examples
The following example deletes entries from the host name-to-address cache.
show hosts
The
show hosts
User EXEC mode command displays the default domain name, a list of name
server hosts, the static and the cached list of host names and addresses.
Syntax
show hosts
[
name
]
•
name—
Name of the host.(Range: 1 - 158 characters)
Default Configuration
Command Mode
User EXEC mode
User Guidelines
• There are no user guidelines for this command.
Examples
The following example displays host information.
Console (config)# clear host *
To Next Page
Loading...
