Dell PowerConnect 5324 - Exit(Configuration)

User Interface 333
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
• There are no user guidelines for this command.
Example
In the following example, because no keyword is entered, a prompt is displayed. After the keyword
is selected, a message confirming the command entry method is displayed.
exit(configuration)
The exit command exits any configuration mode to the next highest mode in the CLI mode
hierarchy.
Syntax
exit
Default Configuration
This command has no default configuration.
Command Mode
All command modes
User Guidelines
• There are no user guidelines for this command.
Example
The following example changes the configuration mode from Interface Configuration mode to
User EXEC mode.
Console# configure
Console (config)#
Console(config-if)# exit
Console(config)# exit
Console#