Dell PowerConnect 5324 Command Line Interface Reference Manual

338 User Interface
www.dell.com | support.dell.com
Example
The following example displays all the commands entered while in the current privileged EXEC
mode.
show privilege
The show privilege User EXEC mode command displays the current privilege level.
Syntax
show privilege
Default Configuration
This command has no default configuration.
Command Mode
User EXEC command mode
User Guidelines
• There are no user guidelines for this command.
Example
The following example displays the current privilege level.
Console# show history
show version
show clock
show history
Console# show privilege
Current privilege level is 15

Dell PowerConnect 5324 Specifications

General

Switching Capacity	48 Gbps
VLAN Support	Yes
Rack Mountable	Yes
Device Type	Switch
MAC Address Table Size	8K entries
RAM	64 MB
Flash Memory	8 MB
Power Device	Internal power supply
Voltage Required	AC 120/230 V (50/60 Hz)
Jumbo Frame Support	Yes
Ports	24 x 10/100/1000 + 2 x SFP
Management	Web-based, SNMP, CLI
Enclosure Type	Rack-mountable
Routing Protocol	Static IP routing
Remote Management Protocol	SNMP 1, 2, 3
Features	Flow control, auto-negotiation, port mirroring, Quality of Service (QoS)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x
Operating Temperature	0 °C to 45 °C
Storage Temperature	-20 °C to 70 °C
Humidity	5% to 95% (non-condensing)
Layer	Layer 2