EasyManuals Logo

Dell PowerConnect 5324 Command Line Interface Reference Manual

Dell PowerConnect 5324
388 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #65 background imageLoading...
Page #65 background image
AAA Commands 65
AAA Commands
aaa authentication login
The
aaa authentication login
Global Configuration mode commands defines login authentication.
To return to the default configuration, use the
no
form of this command.
Syntax
aaa authentication login
{
default
|
list-name
}
method1
[
method2
...]
no aaa authentication login
{
default
|
list-name
}
default
—Uses the listed authentication methods that follow this argument as the default
list of methods when a user logs in.
list-name
—Character string used to name the list of authentication methods activated
when a user logs in.
method1
[
method2
...]—Specify at least one from the following table:
Default Configuration
The local user database is checked. This has the same effect as the command
aaa
authentication login list-name local
.
NOTE: On the console, login succeeds without any authentication check if the authentication method is
not defined.
Command Mode
Global Configuration mode
User Guidelines
The default and optional list names created with the
aaa authentication login
command are
used with the
login authentication
command.
Keyword Source or destination
enable Uses the enable password for authentication.
line Uses the line password for authentication.
local Uses the local username database for authentication.
none Uses no authentication.
radius Uses the list of all RADIUS servers for authentication.
tacacs Uses the list of all TACACS servers for authentication.

Table of Contents

Other manuals for Dell PowerConnect 5324

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dell PowerConnect 5324 and is the answer not in the manual?

Dell PowerConnect 5324 Specifications

General IconGeneral
Switching Capacity48 Gbps
VLAN SupportYes
Rack MountableYes
Device TypeSwitch
MAC Address Table Size8K entries
RAM64 MB
Flash Memory8 MB
Power DeviceInternal power supply
Voltage RequiredAC 120/230 V (50/60 Hz)
Jumbo Frame SupportYes
Ports24 x 10/100/1000 + 2 x SFP
ManagementWeb-based, SNMP, CLI
Enclosure TypeRack-mountable
Routing ProtocolStatic IP routing
Remote Management ProtocolSNMP 1, 2, 3
FeaturesFlow control, auto-negotiation, port mirroring, Quality of Service (QoS)
Compliant StandardsIEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x
Operating Temperature0 °C to 45 °C
Storage Temperature-20 °C to 70 °C
Humidity5% to 95% (non-condensing)
LayerLayer 2

Related product manuals