Dell PowerConnect 5324 Command Line Interface Reference Manual

Address Table Commands 83
• seconds —Time is number of seconds. (Range: 10 - 630 seconds)
Default Configuration
300 seconds
Command Mode
Global Configuration mode
User Guidelines
• There are no user guidelines for this command.
Example
In this example the bridge aging time is set to 250.
clear bridge
The clear bridge Privileged EXEC mode command removes any learned entries from the
forwarding database.
Syntax
clear bridge
• This command has no keywords or arguments.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
• There are no user guidelines for this command.
Example
In this example, the bridge tables are cleared.
Console (config)# bridge aging-time 250
Console# clear bridge

Dell PowerConnect 5324 Specifications

General

Switching Capacity	48 Gbps
VLAN Support	Yes
Rack Mountable	Yes
Device Type	Switch
MAC Address Table Size	8K entries
RAM	64 MB
Flash Memory	8 MB
Power Device	Internal power supply
Voltage Required	AC 120/230 V (50/60 Hz)
Jumbo Frame Support	Yes
Ports	24 x 10/100/1000 + 2 x SFP
Management	Web-based, SNMP, CLI
Enclosure Type	Rack-mountable
Routing Protocol	Static IP routing
Remote Management Protocol	SNMP 1, 2, 3
Features	Flow control, auto-negotiation, port mirroring, Quality of Service (QoS)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x
Operating Temperature	0 °C to 45 °C
Storage Temperature	-20 °C to 70 °C
Humidity	5% to 95% (non-condensing)
Layer	Layer 2