Dell PowerConnect 5324 - 29 User Interface; Enable; Disable

User Interface 331
User Interface
enable
The enable User EXEC mode command enters the privileged EXEC mode.
Syntax
enable [ privilege-level ]
•
privilege-level —Privilege level to enter the system. (Range: 1 - 15)
Default Configuration
The default privilege level is 15.
Command Mode
User EXEC mode
User Guidelines
• There are no user guidelines for this command.
Example
The following example shows how to enter privileged mode:
disable
The disable Privileged EXEC mode command returns to User EXEC mode.
Syntax
disable [ privilege-level ]
•
privilege-level —Privilege level to enter the system. (Range: 1 - 15)
Default Configuration
The default privilege level is 1.
Command Mode
Privileged EXEC mode
Console> enable
enter password:
Console#