Dell PowerConnect 5324 Command Line Interface Reference Manual

326 System Management
www.dell.com | support.dell.com
Default Configuration
This command has no default configuration. No asset tag is defined by default.
Command Mode
Global Configuration mode
User Guidelines
• There are no user guidelines for this command.
Example
The following example specifies the device asset tag as "1qwepot".
show system id
The show system id User EXEC mode command displays the ID information.
Syntax
show system id
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
• The tag information is on a device by device basis.
Example
The following example displays the system service tag information.
Console (config)# asset-tag 1qwepot
Console> show system id
Service Tag: 89788978
Serial number: 8936589782
Asset tag: 7843678957

Dell PowerConnect 5324 Specifications

General

Switching Capacity	48 Gbps
VLAN Support	Yes
Rack Mountable	Yes
Device Type	Switch
MAC Address Table Size	8K entries
RAM	64 MB
Flash Memory	8 MB
Power Device	Internal power supply
Voltage Required	AC 120/230 V (50/60 Hz)
Jumbo Frame Support	Yes
Ports	24 x 10/100/1000 + 2 x SFP
Management	Web-based, SNMP, CLI
Enclosure Type	Rack-mountable
Routing Protocol	Static IP routing
Remote Management Protocol	SNMP 1, 2, 3
Features	Flow control, auto-negotiation, port mirroring, Quality of Service (QoS)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x
Operating Temperature	0 °C to 45 °C
Storage Temperature	-20 °C to 70 °C
Humidity	5% to 95% (non-condensing)
Layer	Layer 2