Dell PowerConnect 5324 Command Line Interface Reference Manual

VLAN Commands 351
show vlan internal usage
The show vlan internal usage Privileged EXEC mode command displays a list of VLANs being used
internally by the switch.
Syntax
show vlan internal usage
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
• There are no user guidelines for this command.
Console# show vlan
Vlan Name Ports Type Authorization
1 default g1-2 other Required
g1-4
10 VLAN0010 g3-4 dynamic Required
11 VLAN0011 g1-2 static Required
20 VLAN0020 g3-4 static Required
21 VLAN0021 static Required
30 VLAN0030 static Required
31 VLAN0031 static Not Required

Dell PowerConnect 5324 Specifications

General

Switching Capacity	48 Gbps
VLAN Support	Yes
Rack Mountable	Yes
Device Type	Switch
MAC Address Table Size	8K entries
RAM	64 MB
Flash Memory	8 MB
Power Device	Internal power supply
Voltage Required	AC 120/230 V (50/60 Hz)
Jumbo Frame Support	Yes
Ports	24 x 10/100/1000 + 2 x SFP
Management	Web-based, SNMP, CLI
Enclosure Type	Rack-mountable
Routing Protocol	Static IP routing
Remote Management Protocol	SNMP 1, 2, 3
Features	Flow control, auto-negotiation, port mirroring, Quality of Service (QoS)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x
Operating Temperature	0 °C to 45 °C
Storage Temperature	-20 °C to 70 °C
Humidity	5% to 95% (non-condensing)
Layer	Layer 2