Dell PowerConnect 5324 Command Line Interface Reference Manual

VLAN Commands 339
VLAN Commands
vlan database
The vlan database Global Configuration mode command enters the VLAN configuration mode.
Syntax
vlan database
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
• There are no user guidelines for this command.
Example
The following example enters the VLAN database mode.
vlan
Use the vlan VLAN Configuration mode command to create a VLAN. To delete a VLAN, use the
no form of this command.
Syntax
vlan { vlan-range }
no vlan { vlan-range }
•
vlan-range —A list of valid VLAN IDs to be added. List separate, non-consecutive VLAN
IDs separated by commas (without spaces); use a hyphen to designate a range of IDs.
(Range: 2 - 4094)
Default Configuration
This command has no default configuration.
Command Mode
VLAN Configuration mode
Console (config)# vlan database
Console (config-vlan)#

Dell PowerConnect 5324 Specifications

General

Switching Capacity	48 Gbps
VLAN Support	Yes
Rack Mountable	Yes
Device Type	Switch
MAC Address Table Size	8K entries
RAM	64 MB
Flash Memory	8 MB
Power Device	Internal power supply
Voltage Required	AC 120/230 V (50/60 Hz)
Jumbo Frame Support	Yes
Ports	24 x 10/100/1000 + 2 x SFP
Management	Web-based, SNMP, CLI
Enclosure Type	Rack-mountable
Routing Protocol	Static IP routing
Remote Management Protocol	SNMP 1, 2, 3
Features	Flow control, auto-negotiation, port mirroring, Quality of Service (QoS)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x
Operating Temperature	0 °C to 45 °C
Storage Temperature	-20 °C to 70 °C
Humidity	5% to 95% (non-condensing)
Layer	Layer 2