Dell PowerConnect 5324 Command Line Interface Reference Manual

98 Clock
www.dell.com | support.dell.com
sntp trusted-key
The sntp trusted-key Global Configuration mode command authenticates the identity of a system
to which Simple Network Time Protocol (SNTP) will synchronize. To disable authentication of the
identity of the system, use the
no form of this command.
Syntax
sntp trusted-key key-number
no sntp trusted-key key-number
• key-number— Key number of authentication key to be trusted. (Range: 1 - 4294967295)
Default Configuration
Not trusted.
Command Mode
Global configuration mode
User Guidelines
• The command is relevant for both received unicast and broadcast.
• If there is at least 1 trusted key, then unauthenticated messages will be ignored.
Examples
The following example authenticates key 8.
sntp client poll timer
The sntp client poll timer Global Configuration mode command sets the polling time for the
Simple Network Time Protocol (SNTP) client. To return to default, use the
no form of this
command.
Syntax
sntp client poll timer seconds
no sntp client poll timer
• seconds— Polling interval in seconds (Range: 60-86400)
Console(config)# sntp authentication-key 8 md5 ClkKey
Console(config)# sntp trusted-key 8
Console(config)# sntp authenticate

Dell PowerConnect 5324 Specifications

General

Switching Capacity	48 Gbps
VLAN Support	Yes
Rack Mountable	Yes
Device Type	Switch
MAC Address Table Size	8K entries
RAM	64 MB
Flash Memory	8 MB
Power Device	Internal power supply
Voltage Required	AC 120/230 V (50/60 Hz)
Jumbo Frame Support	Yes
Ports	24 x 10/100/1000 + 2 x SFP
Management	Web-based, SNMP, CLI
Enclosure Type	Rack-mountable
Routing Protocol	Static IP routing
Remote Management Protocol	SNMP 1, 2, 3
Features	Flow control, auto-negotiation, port mirroring, Quality of Service (QoS)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x
Operating Temperature	0 °C to 45 °C
Storage Temperature	-20 °C to 70 °C
Humidity	5% to 95% (non-condensing)
Layer	Layer 2