Clock 95
clock summer-time
The
clock summer-time
Global Configuration mode command configures the system to
automatically switch to summer time (daylight saving time). To configure the software to not
automatically switch to summer time, use the
no
form of this command.
Syntax
clock summer-time recurring
{
usa
|
eu
| {
week day month hh:mm week day month hh:mm
}}
[
offset
offset
] [
zone
acronym
]
clock summer-time date
date month year hh:mm date month year hh:mm
[
offset
offset
] [
zone
acronym
]
clock summer-time date
month date year hh:mm month date year hh:mm
[
offset
offset
] [
zone
acronym
]
no clock summer-time
•
recurring
—Indicates that summer time should start and end on the corresponding
specified days every year.
•
date
—Indicates that summer time should start on the first specific date listed in the
command and end on the second specific date in the command.
•
usa
—The summer time rules are the United States rules.
•
eu
—The summer time rules are the European Union rules.
•
week—
Week of the month. (Range: 1 - 4,
first
,
last
)
•
day—
Day of the week (Range: first three letters by name, like
sun
)
•
date—
Date of the month (Range:1 - 31)
•
month—
Month (Range: first three letters by name)
•
year—
year - no abbreviation (Range: 2000 - 2097)
•
hh:mm—
Time in military format, in hours and minutes (Range: hh: 0 - 23, mm:0 - 59)
•
offset
offset—
Number of minutes to add during summer time (Range: 1 - 1440).
•
zone
acronym
—The acronym of the time zone to be displayed when summer time is in
effect. If unspecified default to the timezone acronym. (Range: Up to 4 characters)
Default Configuration
Summer time is disabled.
offset
offset—
default is 60
zone
acronym
— If unspecified default to the timezone acronym.
If the timezone has not been defined, the default will be UTC.
To Next Page
Loading...
Need help?
General
