Dell PowerConnect 5324 Command Line Interface Reference Manual

332 User Interface
www.dell.com | support.dell.com
User Guidelines
• There are no user guidelines for this command.
Example
The following example shows how to return to normal mode.
login
The login User EXEC mode command changes a login username.
Syntax
login
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
• There are no user guidelines for this command.
Example
The following example shows how to enter privileged EXEC mode and login.
configure
The configure Privileged EXEC mode command enters the global configuration mode.
Syntax
configure
This command has no keywords or arguments.
Console# disable
Console>
Console> login
User Name:admin
Password:*****
Console#

Dell PowerConnect 5324 Specifications

General

Switching Capacity	48 Gbps
VLAN Support	Yes
Rack Mountable	Yes
Device Type	Switch
MAC Address Table Size	8K entries
RAM	64 MB
Flash Memory	8 MB
Power Device	Internal power supply
Voltage Required	AC 120/230 V (50/60 Hz)
Jumbo Frame Support	Yes
Ports	24 x 10/100/1000 + 2 x SFP
Management	Web-based, SNMP, CLI
Enclosure Type	Rack-mountable
Routing Protocol	Static IP routing
Remote Management Protocol	SNMP 1, 2, 3
Features	Flow control, auto-negotiation, port mirroring, Quality of Service (QoS)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x
Operating Temperature	0 °C to 45 °C
Storage Temperature	-20 °C to 70 °C
Humidity	5% to 95% (non-condensing)
Layer	Layer 2