52 Command Modes
www.dell.com | support.dell.com
set interface active Reactivates an interface that was suspended by the system.
show arp Displays entries in the ARP table.
show authentication methods Displays information about the authentication methods.
show bootvar Displays the active system image file that the device loads at startup
show bridge address-table Displays dynamically created entries in the bridge-forwarding database.
show bridge address-table
count
Displays the number of addresses present in all VLANs or at specific
VLAN.
show bridge multicast address-
table
Displays statically created entries in the bridge-forwarding database.
show bridge multicast address-
table
Displays multicast MAC address table information.
show bridge multicast filtering Displays the multicast filtering configuration.
show copper-ports cable-
length
Displays the estimated copper cable length attached to a port.
show copper-ports tdr Displays the last TDR (Time Domain Reflectometry) tests on specified
ports.
show crypto key mypubkey Displays the SSH public keys stored on the device.
show crypto key pubkey-chain
ssh
Displays SSH public keys stored on the device.
show crypto certificate
mycertificate
Displays the SSL certificates of the device
show dot1x Displays 802.1X status for the switch or for the specified interface.
show dot1x advanced Displays 802.1X enhanced features for the switch or for the specified
interface.
show dot1x users Displays 802.1X users for the switch.
show fiber-ports optical-
transceiver
Displays the optical transceiver diagnostics.
show ip ssh Displays the SSH server configuration.
show lacp port-channel Displays LACP information for a port-channel.
show logging Displays the state of logging and the syslog messages stored in the
internal buffer.
show logging file Displays the state of logging and the syslog messages stored in the
logging file.
show management access-class Displays the active management access-list.
show management access-list Displays management access-lists.
show ports security Displays the port-lock status.
To Next Page
Loading...
Need help?
General
