Chapter 4
| System Management Commands
System Status
– 134 –
Command Usage
The session used to execute this command is indicated by a “*” symbol next to the
Line (i.e., session) index number.
Example
Console#show users
User Name Accounts:
User Name Privilege Public-Key
-------------------------------- --------- ----------
admin 15 None
guest 0 None
steve 15 None
Online Users:
Line User Name Idle time (h:m:s) Remote IP addr
------- -------------------------------- ----------------- ---------------
*console admin 0:00:00
VTY 0 admin 0:00:10 192.168.0.99
SSH 1 steve 0:00:06 192.168.1.19
Web Online Users:
Line User Name Idle time (h:m:s) Remote IP Addr
----- -------------------------------- ----------------- ---------------
HTTP admin 0:00:01 192.168.0.99
Console#
show version This command displays hardware and software version information for the system.
Command Mode
Normal Exec, Privileged Exec
Example
Console#show version
Unit 1
Serial Number : EC1237000040
Hardware Version : R01
EPLD Version : R00 V0.0B
Number of Ports : 52
Main Power Status : Up
Redundant Power Status : Not present
Role : Master
Loader Version : 0.0.1.4
Linux Kernel Version : 2.6.22.18
Boot ROM Version : 0.0.0.1
Operation Code Version : 1.2.1.6
Console#
Table 13: show version – display description
Parameter Description
Serial Number The serial number of the switch.
Hardware Version Hardware version of the main board.
To Next Page
Loading...
Need help?
General