Chapter 12
| Security Measures
ARP Inspection
– 348 –
Figure 213: Displaying Statistics for ARP Inspection
Displaying the
ARP Inspection Log
Use the Security > ARP Inspection (Show Information - Show Log) page to show
information about entries stored in the log, including the associated VLAN, port,
and address components.
Parameters
These parameters are displayed:
Web Interface
To display the ARP Inspection log:
1. Click Security, ARP Inspection.
2. Select Show Information from the Step list.
3. Select Show Log from the Action list.
Table 20: ARP Inspection Log
Parameter Description
VLAN ID The VLAN where this packet was seen.
Port The port where this packet was seen.
Src. IP Address The source IP address in the packet.
Dst. IP Address The destination IP address in the packet.
Src. MAC Address The source MAC address in the packet.
Dst. MAC Address The destination MAC address in the packet.
To Next Page
Loading...
Need help?
General