Chapter 12
| Security Measures
Access Control Lists
– 340 –
Showing ACL
Hardware Counters
Use the Security > ACL > Configure Interface (Show Hardware Counters) page to
show statistics for ACL hardware counters.
Parameters
These parameters are displayed:
◆ Port – Port identifier. (Range: 1-28/52)
◆ Type – Selects the type of ACL.
◆ Direction – Displays statistics for ingress or egress traffic.
◆ Query – Displays statistics for selected criteria.
◆ ACL Name – The ACL bound this port.
◆ Action – Shows if action is to permit or deny specified packets.
◆ Rules – Shows the rules for the ACL bound to this port.
◆ Time-Range – Name of a time range.
◆ Hit – Shows the number of packets matching this ACL.
8
◆ Clear Counter – Clears the hit counter for the specified ACL.
Web Interface
To show statistics for ACL hardware counters:
1. Click Security, ACL.
2. Select Configure Interface from the Step list.
3. Select Show Hardware Counters from the Action list.
4. Select a port.
5. Select ingress or egress traffic.
8. Due to a hardware limitation, statistics are only displayed for permit rules.
To Next Page
Loading...
Need help?
General