Chapter 13
| Basic Administration Protocols
Connectivity Fault Management
– 516 –
◆ Suppressing Alarms – Shows if the specified MEP is currently suppressing
sending frames containing AIS information following the detection of defect
conditions.
Web Interface
To show detailed information for the MEPs configured on this device:
1. Click Administration, CFM.
2. Select Show Information from the Step list.
3. Select Show Local MEP Details from the Action list.
4. Select an entry from MD Index and MA Index.
5. Select a MEP ID.
Figure 320: Showing Detailed Information on Local MEPs
To Next Page
Loading...
