Configuring the ECN330-switch
102 1553-KDU 137 365 Uen D 2006-06-16
Web – Click System, Log, SMTP. Enable SMTP, specify a source email address,
and select the minimum severity level. To add an IP address to the SMTP Server
List, type the new IP address in the SMTP Server field and click Add. To delete
an IP address, click the entry in the SMTP Server List and click Remove. Specify
up to five email addresses to receive the alert messages, and click Apply.
Figure 29 Enabling and Configuring SMTP Alerts
To Next Page
Loading...
