Ericsson ECN330 - Page 1114

Command Line Interface
1108 1553-KDU 137 365 Uen D 2006-06-16
7.27.3 router dvmrp
This command enables Distance-Vector Multicast Routing (DVMRP) globally for
the router and to enter router configuration mode. Use the no form to disable
DVMRP multicast routing.
Syntax
[no] router dvmrp
Default Setting
Disabled
default-gateway Configures the default gateway for IP multicast
routing
RC 1114
ip dvmrp Enables DVMRP on the specified interface IC 1115
ip dvmrp metric Sets the metric used when establishing reverse
paths to some networks on directly attached
interfaces
IC 1116
clear ip dvmrp
route
Clears all dynamic routes in the multicast routing
table
PE 1117
show router dvmrp Displays global DVMRP configuration settings NE,
PE
1117
show ip dvmrp
route
Displays DVMRP routing information NE,
PE
1118
show ip dvmrp
neighbor
Displays DVMRP neighbor information NE,
PE
1120
show ip dvmrp
interface
Displays DVMRP configuration settings for the
interfaces
NE,
PE
1121
Command Function Mode Page