Configuring the ECN330-switch
1331553-KDU 137 365 Uen D 2006-06-16
• If HTTPS is enabled, it must be indicated in the URL that is specified in
the browser: https://device[:port_number]
• When HTTPS is started, the connection is established in this way:
• The client authenticates the server using the server’s digital
certificate.
• The client and server negotiate a set of security protocols to use for
the connection.
• The client and server generate session keys for encrypting and
decrypting data.
• The client and server establish a secure encrypted connection.
A padlock icon should appear in the status bar for Internet Explorer 5.x
or above and Netscape Navigator 4.x or above.
• The following web browsers and operating systems currently support
HTTPS:
Table 11 HTTPS System Support
• To specify a secure-site certificate, see 6.5.3.1 "Replacing the Default
Secure-site Certificate" 134.
Command Attributes
• HTTPS Status – Enables/disables the HTTPS server feature on the
ECN330-switch.
(Default: Enabled)
•
Change HTTPS Port Number – Specifies the UDP port number used
for HTTPS/SSL connection to the ECN330-switch’s web interface.
(Default: Port 443)
Web Browser Operating System
Internet Explorer 5.0 or later Windows 98,Windows NT (with service
pack 6a), Windows 2000, Windows XP
Netscape Navigator 6.2 or later Windows 98,Windows NT (with service
pack 6a), Windows 2000, Windows XP,
Solaris 2.6
To Next Page
Loading...
