Configuring the ECN330-switch
1831553-KDU 137 365 Uen D 2006-06-16
Web – Click Security, VLAN ACL, VLAN Filtering. Select the required access
map from the drop-down list, use the Binding and Remove buttons to select the
VLANs to which the access map is bound, then click Apply.
Figure 67 Mapping Access Maps to VLANs
CLI – This examples binds vlanMAP1 to VLAN 2.
Console(config)#vlan filter vlanMAP1 vlan-lists 2
Console(config)#
Console#show vlan filter access-map vlanMAP1
Access-map: vlanMAP1
Applied VLAN Lists: 2
Match IP VLANACL: ipACL1
Match MAC VLANACL: macACL1
Action: forward
Console#
To Next Page
Loading...
