Configuring the ECN330-switch
2691553-KDU 137 365 Uen D 2006-06-16
• Domain Status – This parameter is used to activate an EAPS domain.
EAPS Domain Protected VLAN Configuration
• EAPS Domain Name – Name of a configured EAPS domain.
• VLAN List – Protected VLANs are used to send and receive data traffic
on the EAPS ring. (Range: 1-4094)
Up to nine Protected VLANs can be configured in an EAPS domain.
First create the VLANs to be used as Protected VLANs (see “Creating
VLANs” on page 284), and then add the Protected VLAN to the EAPS
domain.
Once the domain has been activated (EAPS Domain Configuration -
Domain Status, section 6.11.2 on page 265), the configuration of the
Protected VLAN cannot be modified. The Domain Status must first be
set to Disabled to stop the EAPS domain before making any
configuration changes to this domain.
To Next Page
Loading...
