Configuring the ECN330-switch
2711553-KDU 137 365 Uen D 2006-06-16
Click EAPS, Domain Configuration to display the EAPS domain settings.
Figure 106 Displaying EAPS Domain Settings
CLI – This example enables EAPS globally on the ECN330-switch.
Console(config)#eaps domain rd
Console(config-eaps)#control-vlan 3
Console(config-eaps)#port primary 26
Console(config-eaps)#port secondary 27
Console(config-eaps)#hellotime 2
Console(config-eaps)#failtime 3
Console(config-eaps)#mode master
Console(config-eaps)#protect-vlan 2
Console(config-eaps)#protect-vlan 246
Console(config-eaps)#protect-vlan 247
Console(config-eaps)#protect-vlan 248
Console(config-eaps)#enable
Console(config-eaps)#
To Next Page
Loading...
