Configuring the ECN330-switch
3311553-KDU 137 365 Uen D 2006-06-16
Command Attributes
• WRR Setting Table – Displays a list of weights for each traffic class
(that is, queue).
Note: This parameter is displayed in the CLI as “Queue ID."
• Weight Value – Set a new weight for the selected traffic class.
(Range: 1-15)
Web – Click Priority, Queue Scheduling. Select the interface, highlight a traffic
class (that is, output queue), enter a weight, then click Apply.
Figure 134 Queue Scheduling
To Next Page
Loading...
