Ericsson ECN330 - Page 363

Configuring the ECN330-switch
3571553-KDU 137 365 Uen D 2006-06-16
Web – Click IGMP Snooping, IGMP Configuration. Adjust the IGMP settings as
required, and then click Apply. (The default settings are shown in Figure 146.)
Figure 146 IGMP Configuration
CLI – This example modifies the settings for multicast filtering, and then displays
the current status.
Console(config)#ip igmp snooping
Console(config)#ip igmp snooping report-suppression
Console(config)#ip igmp snooping querier
Console(config)#ip igmp snooping query-count 10
Console(config)#ip igmp snooping query-interval 100
Console(config)#ip igmp snooping query-max-response-time 100
Console(config)#ip igmp snooping report suppression
Console(config)#ip igmp snooping router-port-expire-time 300
Console(config)#ip igmp snooping version 2
Console(config)#exit
Console#show ip igmp snooping
Service Status: Enabled
Report Suppression: Enabled
Querier Status: Disabled
Query Count: 2
Query Interval: 125 sec
Query Max Response Time: 100 (tenths of sec)
Router Port Expire Time: 300 sec
IGMP Snooping Version: Version 2
Console#