Configuring the ECN330-switch
358 1553-KDU 137 365 Uen D 2006-06-16
6.16.2.2 Displaying Interfaces Attached to a Multicast Router
Multicast routers that are attached to ports on the ECN330-switch use
information obtained from IGMP, along with a multicast routing protocol such as
DVMRP or PIM, to support IP multicasting across the Internet. These routers
may be dynamically discovered by the ECN330-switch or statically assigned to
an interface on the ECN330-switch.
The Multicast Router Port Information page can be used to display the ports on
the ECN330-switch attached to a neighboring multicast router/switch for each
VLAN ID.
Command Attributes
• VLAN ID – ID of configured VLAN (1-4094).
• Multicast Router List – A list of ECN330 ports that are attached to
multicast routers. These multicast routers have either been dynamically
discovered by the ECN330-switch or have been statically assigned to an
interface on the ECN330-switch.
Web – Click IGMP Snooping, Multicast Router Port Information. Select the
required VLAN ID from the scroll-down list to display the associated multicast
routers.
Figure 147 Multicast Router Port Information
To Next Page
Loading...
