Configuring the ECN330-switch
4091553-KDU 137 365 Uen D 2006-06-16
Command Attributes
• IP Address – IP address of a dynamic entry in the cache.
• MAC Address – MAC address mapped to the corresponding IP
address.
• Interface – VLAN interface associated with the address entry.
• Dynamic to Static – Changes a selected dynamic entry to a static
entry.
• Clear All – Deletes all dynamic entries from the ARP cache.
• Entry Count – The number of dynamic entries in the ARP cache.
Note: The Dynamic to Static and Clear All web interface buttons take effect
immediately. There is no prompt to confirm the action.
Web - Click IP, ARP, Dynamic Addresses. Use the buttons provided to change a
dynamic entry to a static entry, or to clear all dynamic entries in the cache.
Figure 178 ARP Dynamic Addresses
To Next Page
Loading...
