Ericsson ECN330 - Page 516

Configuring the ECN330-switch
510 1553-KDU 137 365 Uen D 2006-06-16
CLI – This example displays information about the BSR
6.21.5.9 Displaying the PIM-SM Interfaces
Use the PIM-SM Interface Information page to display information about
interfaces configured for PIM-SM.
Command Attributes
• Interface – A VLAN interface on this router.
• Address – The IP address for this interface.
• Mode – The PIM mode in use (Sparse Mode).
• Neighbor Count – The number of PIM neighbors detected on this
interface.
• DR Address – The designated PIM router for this interface.
Console#show ip pim bsr-router
PIMv2 BootStrap Information:
This system is the BootStrap Router (BSR)
BSR address: 192.168.1.250
BSR priority: 200
BSR hash mask length: 20
Uptime: 0:7:31
Next BootStrap Message in 0:0:34
Candidate BSR: 192.168.1.250 (Vlan1)
Candidate-BSR Priority: 200
Candidate-BSR hash mask length: 20
Candidate RP: 192.168.1.250 (Vlan1)
Candidate-RP Group/masklen: 224.0.0.0/8
Candidate-RP Priority: 200
Next advisement in 0:0:7
Console#