Configuring the ECN330-switch
5131553-KDU 137 365 Uen D 2006-06-16
6.21.5.11 Displaying Neighbor Information
The router can display all the neighboring PIM-SM routers.
Command Attributes
• Neighbor Address – IP address of the next-hop router.
• Interface – VLAN that is attached to this neighbor.
• Up time – The duration this entry has been active.
• Expire – The time before this entry will be removed.
• Mode – PIM mode used on this interface (that is, Sparse).
Web – Click Routing Protocol, PIM-SM, Neighbor Information.
Figure 238 PIM-SM Neighbor Information
CLI – This example displays the only neighboring PIM-SM router.
Console#show ip pim neighbor
Address VLAN Interface Uptime Expire Mode
--------------- ---------------- -------- -------- -------
192.168.0.194 1 0:4:21 0:1:24 Sparse(DR)
Console#
To Next Page
Loading...
