Command Line Interface
524 1553-KDU 137 365 Uen D 2006-06-16
• EAPS Configuration - These commands configure Automatic Ethernet
Protection Switching for increased availability of Ethernet rings
commonly used in service provider networks.
• Interface Configuration - These commands modify the port
configuration such as speed-duplex and negotiation.
• Line Configuration - These commands modify the console port and
Telnet configuration, and include commands such as parity and
databits.
• Multiple Spanning Tree Configuration - These commands configure
settings for the selected multiple spanning tree instance.
• Policy Map Configuration - Creates a DiffServ policy map for multiple
interfaces.
• Router Configuration - These commands configure global settings for
unicast and multicast routing protocols.
• VLAN Configuration - Includes the command to create VLAN groups.
To enter the Global Configuration mode, enter the command configure in
Privileged Exec mode. The system prompt changes to Console(config)#,
which provides access privilege to all Global Configuration commands.
Console#configure
Console(config)#
To Next Page
Loading...
