Initial Configuration
491553-KDU 137 365 Uen D 2006-06-16
For a more detailed explanation on how to configure the ECN330-switch for
access from SNMP v3 clients, refer to “Simple Network Management Protocol”
on page 106, or refer to the specific CLI commands for SNMP starting on page
608.
Console(config)#snmp-server view mib-2 1.3.6.1.2.1 included
Console(config)#snmp-server view 802.1d 1.3.6.1.2.1.17 included
Console(config)#snmp-server group r&d v3 auth mib-2 802.1d
Console(config)#snmp-server user steve group r&d v3 auth md5
greenpeace priv des56 einstien
Console(config)#
To Next Page
Loading...
