Command Line Interface
5631553-KDU 137 365 Uen D 2006-06-16
Example
The following example shows how to download new firmware from a TFTP
server:
The following example shows how to upload the configuration settings to a file
on the TFTP server:
The following example shows how to copy the running configuration to a startup
file.
Console#copy tftp file
TFTP server ip address: 10.1.0.19
Choose file type:
1. config: 2. opcode: 3. diag: 4. loader: 2
Source file name: CXC_132_8902_V3.15.BIX
Destination file name: CXC_132_8902_V3.15.BIX
\Write to FLASH Programming.
-Write to FLASH finish.
Success.
Console#
Console#copy file tftp
Choose file type:
1. config: 2. opcode: 3. diag: 4. loader: 1
Source file name: startup
TFTP server ip address: 10.1.0.99
Destination file name: startup.01
TFTP completed.
Success.
Console#
Console#copy running-config file
destination file name : startup
Write to FLASH Programming.
\Write to FLASH finish.
Success.
Console#
To Next Page
Loading...
