Command Line Interface
5711553-KDU 137 365 Uen D 2006-06-16
Command Mode
Global Configuration
Command Usage
Telnet is considered a virtual terminal connection and will be shown as Vty
in screen displays such as show users. However, the serial
communication parameters (for example, databits) do not affect Telnet
connections.
Example
To enter console line mode, enter the following command:
Related Commands
show line (section 7.5.31 on page 583)
show users (section 7.5.5 on page 549)
7.5.20 login
Use this command to enable password checking at login. Use the no form to
disable password checking and allow connections without a password.
Syntax
login [local]
no login
local - Selects local password checking. Authentication is based on
the user name specified with the username command.
Default Setting
login local
Console(config)#line console
Console(config-line)#
To Next Page
Loading...
