Configuring the ECN330-switch
531553-KDU 137 365 Uen D 2006-06-16
6.2.2 Configuration Options
Configurable parameters have a dialog box or a drop-down list. Once a
configuration change has been made on a page, be sure to click on the “Apply”
button to confirm the new setting. Table 7 summarizes the web page
configuration buttons.
Table 7 Web Page Configuration Buttons
Note: To ensure proper screen refresh, be sure that Internet Explorer 5.x is
configured as follows: Under the menu “Tools / Internet Options / General /
Temporary Internet Files / Settings,” the setting for item “Check for newer
versions of stored pages” should be “Every visit to the page.”
Note: When using Internet Explorer 5.0, the screen may have to be manually
refreshed after making configuration changes by pressing the browser’s refresh
button.
6.2.3 Panel Display
The web agent displays an image of the ECN330-switch’s ports. The Mode can
be set to display different information for the ports, including Active (that is, up
or down), Duplex (that is, half or full duplex), or Flow Control (that is, with or
without flow control). Clicking on the image of a port opens the Port
Configuration page as described on page 184.
Figure 8 Front Panel Indicators
Button Action
Apply Sets specified values to the system.
Revert Cancels specified values and restores current
values prior to pressing “Apply.”
Help Links directly to web help.
To Next Page
Loading...
