Configuring the ECN330-switch
54 1553-KDU 137 365 Uen D 2006-06-16
6.2.4 Main Menu
Using the onboard web agent, system parameters can be defined, the ECN330-
switch and all its ports can be managed and controlled, and network conditions
monitored. Table 8 briefly describes the selections available from this program.
Table 8 ECN330-switch Main Menu
Menu Description Page
System 69
System Information Provides basic system description, including contact
information
69
System Mode Configure the ECN330-switch to operate in normal
mode or one of the tunneling modes (QinQ or
L2MPLS)
71
System MTU Sets the maximum transfer unit for traffic crossing the
ECN330-switch
72
System SBC Mode Enables or disables the Single-Board Computer 74
Switch Information Shows the number of ports, hardware/firmware
version numbers, and power status
75
Bridge Extension Shows the bridge extension parameters 77
Jumbo Frames Enables support for jumbo frames 79
File Management 86
Copy Operation Allows the transfer and copying files 87
Delete Allows deletion of files from the flash memory 87
Set Startup Sets the startup file 87
To Next Page
Loading...
