Command Line Interface
592 1553-KDU 137 365 Uen D 2006-06-16
Table 45 show logging flash - Display Description
The following example displays settings for the trap function.
Table 46 show logging trap - Display Description
Field Description
Syslog
logging
Shows if system logging has been enabled using the
logging on command.
History
logging in
FLASH
The message level(s) reported based on the logging
history command.
History
logging in
RAM
The message level(s) reported based on the logging
history command.
Console#show logging trap
Syslog logging: Enable
REMOTELOG status: disable
REMOTELOG facility type: local use 7
REMOTELOG level type: Debugging messages
REMOTELOG server IP address: 192.168.1.4
REMOTELOG server IP address: 0.0.0.0
REMOTELOG server IP address: 0.0.0.0
REMOTELOG server IP address: 0.0.0.0
REMOTELOG server IP address: 0.0.0.0
Console#
Field Description
Syslog
logging
Shows if system logging has been enabled using the
logging on command.
REMOTELOG
status
Shows if remote logging has been enabled through the
logging trap command.
REMOTELOG
facility type
The facility type for remote logging of syslog messages as
specified in the logging facility command.
To Next Page
Loading...
