Command Line Interface
5931553-KDU 137 365 Uen D 2006-06-16
Related Commands
show logging sendmail (section 7.5.45 on page 599)
7.5.39 show log
This command displays the log messages stored in local memory.
Syntax
show log {flash | ram}
• flash - Event history stored in flash memory (that is, permanent
memory).
• ram - Event history stored in temporary RAM (that is, memory
flushed on power reset).
Default Setting
None
Command Mode
Privileged Exec
REMOTELOG
level type
The severity threshold for syslog messages sent to a
remote server as specified in the logging trap
command.
REMOTELOG
server IP
address
The address of syslog servers as specified in the
logging host command.
Field Description
To Next Page
Loading...
