Command Line Interface
642 1553-KDU 137 365 Uen D 2006-06-16
Example
7.7.6 radius-server port
This command sets the RADIUS server network port. Use the no form to restore
the default.
Syntax
radius-server port <port_number>
no radius-server port
port_number - RADIUS server UDP port used for authentication
messages. (Range: 1-65535)
Default Setting
1812
Command Mode
Global Configuration
Example
Console(config)#radius-server 1 host 192.168.1.20 port 181 timeout
10 retransmit 5 key green
Console(config)#
Console(config)#radius-server port 181
Console(config)#
To Next Page
Loading...
