Configuring the ECN330-switch
60 1553-KDU 137 365 Uen D 2006-06-16
EAPS 258
Configuration Activates the configured EAPS domains 264
Domain Configuration Creates an EAPS domain, configures domain
parameters, and protected VLANs
265
VLAN 272
802.1Q VLAN 272
GVRP Status Enables GVRP VLAN registration protocol 276
Basic Information Displays information on the VLAN type supported by
the ECN330-switch
277
Current Table Shows the current port members of each VLAN and
whether or not the port is tagged or untagged
283
Static List Used to create or remove VLAN groups 284
Static Table Modifies the settings for an existing VLAN 287
Static Membership Configures membership type for interfaces, including
tagged, untagged or forbidden
289
Port Configuration Specifies default PVID and VLAN attributes 290
Trunk Configuration Specifies default trunk VID and VLAN attributes 290
VLAN MAC Address Configures the MAC address of a VLAN 294
Private VLAN 303
Information Shows private VLANs and associated ports 304
Configuration Configures private VLANs 306
Association Maps a secondary VLAN to a primary VLAN 307
Port Information Shows VLAN port type, and associated primary or
secondary VLANs
308
Menu Description Page
To Next Page
Loading...
