Ericsson ECN330 - Page 67

Configuring the ECN330-switch
611553-KDU 137 365 Uen D 2006-06-16
Port Configuration Configures VLAN port type, and associated primary or
secondary VLANs
309
Trunk Information Shows VLAN trunk type, and associated primary or
secondary VLANs
308
Trunk Configuration Configures VLAN trunk type, and associated primary
or secondary VLANs
309
Protocol VLAN 311
Configuration Creates a protocol group, specifying the supported
protocols
312
Port Configuration Maps a protocol group to a VLAN 313
L2MPLS 314
VLAN Configuration Configures a VLAN to operate as an L2MPLS tunnel,
associates input/output MPLS labels with the VLAN
319
Port Configuration Sets the MPLS characteristics for an uplink port 320
Trunk Configuration Sets the MPLS characteristics for an uplink trunk 320
VPN Information Displays the L2MPLS client VLAN interface and uplink
interface information
322
Priority 324
Default Port Priority Sets the default priority for each port 324
Default Trunk Priority Sets the default priority for each trunk 324
Traffic Classes Maps IEEE 802.1p priority tags to output queues 326
Traffic Classes Status Enables/disables traffic class priorities (not
implemented)
NA
Queue Mode Sets queue mode to strict priority or Weighted Round-
Robin
329
Menu Description Page