Command Line Interface
6851553-KDU 137 365 Uen D 2006-06-16
• Status – Current authorization status of the client (authorized or
unauthorized).
• Operation Mode – Shows if single or multiple hosts (clients) can
connect to an 802.1X-authorized port.
• Max Count – The maximum number of hosts allowed to access this
port (configurable, see section 7.7.38 on page 678).
• Port-control – Shows the current configured status of the port-
control mode as Auto, ForceUnauthorized, or ForceAuthorized
(configurable, see section 7.7.37 on page 677).
• Supplicant – The MAC address of a currently authorized client.
Zeros are displayed if no client is authorized.
• Current Identifier – The integer (0-255) used by the
Authenticator to identify the current authentication session; that is,
the current unit among multiple hosts..
• Authenticator State Machine
• State – Current status of authentication (including initialize,
disconnected,
connecting, authenticating, authenticated, aborting,
held, force_authorized, force_unauthorized).
• Reauth Count – The current number of times the connecting state
has been re-entered.
• Backend State Machine (current status)
• State – Current state (including request, response, success, fail,
timeout, idle, initialize).
• Request Count – Number of EAP Request packets sent to the
Supplicant without receiving a response.
• Identifier(Server) – Identifier carried in the most recent EAP
Success, Failure or Request packet received from the
Authentication Server.
• Reauthentication State Machine (current status)
• State – Current state (including initialize, reauthenticate).
To Next Page
Loading...
