Ericsson ECN330 - Page 743

Command Line Interface
7371553-KDU 137 365 Uen D 2006-06-16
7.9.1 interface
This command configures an interface type and enter interface configuration
mode. Use the no form to remove a trunk.
Syntax
interface <interface>
no interface port-channel <channel-id>
interface
• ethernet <unit>/<port>
• unit - This is device 1.
• port - Physical port number on the ECN330 (Range: 1-28).
• port-channel <channel-id> - The assigned number of an
aggregated link (Range: 1-13)
• vlan <vlan-id> (Range: 1-4094)
Default Setting
None
Command Mode
Global Configuration
show
interfaces
counters
Displays statistics for the specified interfaces NE,
PE
751
show
interfaces
switchport
Displays the administrative and operational status of an
interface
NE,
PE
753
Command Function Mode Page