Command Line Interface
782 1553-KDU 137 365 Uen D 2006-06-16
Command Usage
If a device is connected to an ECN330 port and the ECN330-switch detects
that it requires more than the maximum power allocated to the port, no
power is supplied to the device (the port power remains off).
Example
7.13.4 power inline priority
This command sets the power priority for specific ports. Use the no form to
restore the default setting.
Syntax
power inline priority <priority>
no power inline priority
priority - The power priority for the port.
Options: 1 (critical), 2 (high), or 3 (low).
Default Setting
3 (low)
Command Mode
Interface Configuration
Console(config)#interface ethernet 1/1
Console(config-if)#power inline maximum allocation 16000
Console(config-if)#
To Next Page
Loading...
