Command Line Interface
8071553-KDU 137 365 Uen D 2006-06-16
Default Setting
32768
Command Mode
MST Configuration
Command Usage
• MST priority is used in selecting the root bridge and alternate bridge of
the specified instance. The device with the highest priority (that is,
lowest numerical value) becomes the MSTI root device. However, if all
devices have the same priority, the device with the lowest MAC address
will then become the root device.
• The ECN330-switch can be set to act as the MSTI root device by
specifying a priority of 0, or as the MSTI alternate device by specifying
a priority of 16384.
Example
7.15.12 name
This command configures the name for the multiple spanning tree region in
which the ECN330-switch is located. Use the no form to clear the name.
Syntax
name <name>
name - Name of the spanning tree.
Default Setting
ECN330-switch’s MAC address
Console(config-mstp)#mst 1 priority 4096
Console(config-mstp)#
To Next Page
Loading...
