Command Line Interface
808 1553-KDU 137 365 Uen D 2006-06-16
Command Mode
MST Configuration
Command Usage
The MST region name and revision number (section 7.15.13 on page 808)
are used to designate a unique MST region. A bridge (that is, spanning-tree
compliant device such as the ECN330-switch) can only belong to one MST
region. And all bridges in the same region must be configured with the same
MST instances.
Example
Related Commands
revision (section 7.15.13 on page 808)
7.15.13 revision
This command configures the revision number for this multiple spanning tree
configuration of the ECN330-switch. Use the no form to restore the default.
Syntax
revision <number>
number - Revision number of the spanning tree. (Range: 0-65535)
Default Setting
0
Command Mode
MST Configuration
Console(config-mstp)#name R&D
Console(config-mstp)#
To Next Page
Loading...
