Command Line Interface
8431553-KDU 137 365 Uen D 2006-06-16
7.17.1.1 bridge-ext gvrp
This command enables GVRP globally for the ECN330-switch. Use the no form
to disable it.
Syntax
[no] bridge-ext gvrp
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
GVRP defines a way for switches to exchange VLAN information in order to
register VLAN members on ports across the network. This function should
be enabled to permit automatic VLAN registration, and to support VLANs
which extend beyond the local switch.
Example
7.17.1.2 show bridge-ext
This command shows the configuration for bridge extension commands.
Default Setting
None
Command Mode
Privileged Exec
Console(config)#bridge-ext gvrp
Console(config)#
To Next Page
Loading...
