Command Line Interface
896 1553-KDU 137 365 Uen D 2006-06-16
Remote VC
Label
This label is used by a remote peer switch.
MPLS Uplink Port Information
Uplink Intf The uplink port connected to the client interface.
Tunnel Label The MPLS tunnel label that is used by switches within the
MPLS core network to establish a path from the entry
point to the exit point.
VC Label The Virtual Channel identifier that is used to map traffic to
a specific customer port on the edge switches at the
boundaries of the MPLS network.
NextHopIP The IP address of the next hop across the MPLS network.
DA MAC The MAC address of the remote switch’s interface at the
other end of the VC. The default DA-MAC of MPLS uplink
port is 00-00-00-00-00-00.
Field Description
To Next Page
Loading...
